When it’s time to say goodbye to the rollers in the track, what should you do?
All parts of a garage door will wear out over time.
Rollers are no exception to this reality.
As part of the mechanism that moves the sectional panels, the heavy door can cause damages to the roller.
It’s best to learn how to replace garage door rollers to make sure that your garage has a working door all the time.
You can’t risk damaged rollers giving out, especially as the door panels move up the tracks.
It costs less to replace the rollers than to put your garage’s safety to compromise.
Steps to replace the roller
Start the roller replacement by buying the replacement rollers.
Check the current rollers in the tracks and count the number of rollers present.
If you plan to switch to another type of roller, there are other options available in the market.
Step 1: Disconnect the panels from the opener
When you replace the rollers, you need to open the garage manually.
Disengage the sectional panels from the opener by pulling the emergency release cord.
Turn off the door opener and lift the door panels upwards.
Secure the bottom panel in the tracks by using a c-clamp.
Step 2: Create a bend in the track
Find a level height (preferably your elbow height) and create a bend in the seam.
Pry a right angle (90-degree angle) in a spot in the vertical track using a pair of pliers.
Do this for one side of the tracks first, and attend to the other side later.
Avoid overbending the seam so you won’t create too much warp in that spot of the track.
Step 3: Replace the bottom roller
Loosen the c-clamp from the bottom panel and slide down the heavy door carefully.
Make sure the bottom-most roller is on the bend of the seam.
Hold the bottom panel with your non-dominant hand.
Pop the current roller with a screwdriver and secure the replacement in place.
Step 4: Continue replacing the other rollers
Always make sure the current replacement is secure on its side.
Slowly slide down the sectional panels as the next roller pops out of place.
Replace the roller again and keep doing this until all rollers on one side already have a replacement.
It’s best to work with someone assisting you; if not, you can use a horse saw for support.
Step 5: Repair the seam of the track
Once you replace all the rollers on one side, fix the bent seam.
Using the pliers, pry the bend close and tightly in the tracks.
Make sure the bend is tight so no rollers can pop out as it travels along the track.
A loose seam can cause the door to come off the tracks.
Step 6: Repeat the steps to the other side
Lift the door along the tracks again.
Do the same steps to the other side and replace the rollers securely.
Once you finish the steps, re-engage the top-most panel to the opener.
Test your work by opening the garage automatically.
Roller replacement service in Long Beach
Roller replacement can take some time to do.
Since you’re dealing with individual rollers, each replacement can consume some time to finish.
Moreover, having proper help in roller replacements can provide optimal support to the doors within the tracks.
Remember, you’re taking out the rollers that move the sectional panels.
With a missing roller, the garage door can be hefty in its place.
If you’re looking for reliable service in Long Beach, don’t worry.
We are Long Beach Garage Door Repair, and we offer roller replacement service to all residences and businesses in Long Beach.
Always remember, we are here to offer you help and services in your garage.
Book an appointment with our team
There’s comfort in knowing that reliable services are available for you all the time.
As such, here at Long Beach Garage Door Repair, we give affordable services to you.
Part of our garage door repair in Long Beach is roller replacement.
We also offer garage door installation in Long Beach if you decide that it’s time to upgrade to a new garage door.
We are available 24/7 to accommodate various schedules.
Don’t hesitate to contact us as we know how to replace garage door rollers efficiently.