Garage Door Won’t Close

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Get in touch with our garage door repair team and help is on it’s way! When it comes to garage door services in Long Beach and its surroundings, Better leave it up to the professionals. For a FREE quote and estimate..

    CALL NOW: ☎️ (562)362-4971

    Or, fill out this form and we will contact you shortly

    Show us the damage: Send us some photos for a FREE cost estimate.

    Garage Door Won't Close

    Most of us consider our garage as the main entrance and exit to our property.

    Thus, leaving a crucial role to our hardware in allowing us to enter and leave the premise conveniently.

    Apart from that, garage doors are supposed to keep us safe.

    But, what if one night you come home to a widely opened overhead door?

    Moreover, before you call your trusted service provider in Long Beach, you might want to try some simple troubleshooting.

    Moreover, if you’re not confident in your skills, you can always call Long Beach Garage Doors.

    We specialize in providing reliable mechanical door repairs, installations, parts replacement, and more.

    Entrust your hardware to the experts that always prioritize the interests of their customers.

    However, before we go deeper into our topic, first, let’s understand why our garage door won’t close?

    Read on to find out the common reasons why overhead doors are exhibiting movement problems and how to fix them.

    1. Blocked safety sensors

    The first thing that you need to check when your garage door won’t close is the safety sensors.

    This device is responsible for transmitting a signal to the hardware on when to stop lowering its door panel.

    If there’s the presence of objects or anything that might block its signal, it will prematurely retract the panel from closing.

    Located six (6) inches above the ground and on each side of the hardware, check for any obstruction.

    Remove any obstruction, wipe it down and check for the sensors’ alignment.

    2. Safety sensors are misaligned

    As stated above, when the hardware is prompted, it transmits a signal that either lifts open or closes the panel.

    In this case, the garage door will not lower the panel to close.

    However, even after removing any obstruction and the problem still exists, misaligned sensors are possible.

    Due to everyday use and friction, the movement might have caused the displacement of the sensors.

    Checks for proper alignment—then re-align the sensors’ light lasers accordingly.

    3. Limit setting issues

    If this issue may have appeared after purchasing and replacing the door panel–check the opener.

    Then, check for the limit setting.

    It’s likely possible that the opener’s limit setting did not match the newly purchased door panel’s feature.

    The limit setting is responsible for how far should the door panel closes entirely.

    If you find it difficult to adjust the door’s setting, call a reliable technician to undertake the task.

    4. Inadequate transmitter battery

    For the hardware to work perfectly, it needs a working battery that can transmit a signal when prompted to open or close.

    So, when the transmitter will run out of battery, it’s likely the door panel will exhibit movement problems.

    Replacing the battery is probably one of the simplest ways to resolve the issue.

    However, in case the problem would still exist after troubleshooting, call for technical support.

    5. Misaligned tracks

    A misaligned track should be addressed immediately.

    That’s because the issue is beyond the closing mechanism problem.

    The overhead door track is a path that facilitates the panel as it lowers and lifts open.

    If there’s a presence of misalignment, not only it will cause tension to the adjacent parts but also poses a safety risk.

    Bear in mind the standard weight of the door panel weighs 130 to 230 pounds.

    If the panel is prompted, it will be forced to cross a misaligned track.

    As a result, it will further cause damage to the tracks prompting you to spend on expensive repairs.

    In any way, do not attempt to re-align the tracks if you don’t have the necessary equipment and skills.

    6. Frequency issues

    Out of range is one of the most common issues when the garage door won’t close properly.

    You can easily resolve the issue with a few troubleshooting such as prompting the door to close at a close distance.

    If this is not the case, the next thing you need to inspect is the antenna.

    By doing this, you need to remove any possible obstruction that hinders the transmission of the signal.

    Another issue that you might want to consider is the frequency of your neighbor.

    Since chances of using the same frequency are not impossible.

    As ridiculous as it sounds, we must consider all the possibilities to resolve the issue.

    Fast and Reliable Service Provider in Long Beach

    In case we were not able to mention the list of possible issues, don’t delay calling your nearest expert technician in Long Beach!

    For garage door issues, do not hesitate to give us a call any time!

    We have a technical team on standby to respond to your emergency repairs.

    When your garage door won’t close and you live around the Long Beach area, contact us and we will be right there instantly!

    Your safety is our priority!

    Rate this post
    We hope you enjoyed the above article titled Garage Door Won’t Close. For more great articles such as “Garage Door Won’t Close”, feel free to browse our blog for more great content. Long Beach Garage Door Repair.

    Recommended articles

    How To Tighten Garage Door Springs

    The springs of the doors to the garage have an important function inside the garage. These springs are responsible for lifting the heavy door slabs. With the help of cables and rollers, you can guarantee that the doors will travel up the tracks smoothly. You

    Read More »

    How To Replace Garage Door Rollers

    When it’s time to say goodbye to the rollers in the track, what should you do? All parts of a garage door will wear out over time. Rollers are no exception to this reality. As part of the mechanism that moves the sectional panels, the

    Read More »

    How To Open Garage Door Manually From Outside

    Garage lockouts can happen all the time. If you don’t have a stable power supply, the door opener can’t lift the sectionals along the door tracks automatically. You’re stuck with a stubborn garage door, and you may experience hassle and annoyance when it happens. When

    Read More »

    How To Improve Garage Door Opener Reception

    Poor reception often leads to unresponsive garage doors. Many garage owners struggle with openers that don’t lift the sectional panels when necessary. Have you ever experienced pushing down the remote buttons yet failing to open the doors to the garage? The first thing you’ll probably

    Read More »

    How To Adjust Garage Door Cables

    The function of a cable inside the garage is to provide support in lifting the garage door. The cables and the springs work together to lift hefty sectional panels. Whenever you open the garage or lower the panels, the cables should wind tightly to avoid

    Read More »
    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar